LED Tube Light

Winter to the industry is a sweeping proposition, LED Tube current in the spring, not winter, not to micro and small enterprises, represented as a standard to measure the LED industry, the season, after all, have the ability to have real technology companies, faced with LED applications, a huge market, there is still a huge space beings, these enterprises in the spring is just beginning.

LED industry is facing temporary difficulties with the U.S. financial crisis and debt crisis in Europe caused by the external environment, the poor, with the national macro-control policy, and rising raw material and labor costs, RMB appreciation and so on, but I believe that the failure of a business can not blame the external environment, because the external environment, competition is the same case at the state fair, so the final analysis, caused by internal factors.

An industry also believes that the current points-based LED Tube Light loss, in addition to the impact of regulation by real estate, there are three reasons: First, the current upstream industry chain is not cutting-edge technology in their own hands, resulting in high production costs and sales costs are high, so do not make money. The second is the people’s deep understanding of the LED, and the homogenization of the product too, nothing new, both to aid in the form of dealers to sell. 3 is not a good marketing policy into the market, largely in low-end market price, the direct collision of the enemy 1000 injury self-harm 800 is too expensive. Fourth, there is no industry standard, I heard that LED to make money, and no one to point a, have been diverted.

LED Bulb glow with the traditional lighting works differently, it has a point light source, high brightness, narrow beam output and so on. Manufacture LED lamps first thing to consider is to take full advantage of the limited flux limited exposure range, the core of conventional lighting technology with light, the real technical content or in the light of the light distribution, street lighting and tunnel lighting has proven the case this point, the LED light source with a new type of lighting designers made ​​a higher demand. Inspired by the sentiment of human life, innovation comes from the technical personnel, companies should pay attention to human resources, so people-oriented.

The lamp

Has been developed to support the efforts of the LED lighting industry gradually increased. In 1998, the exclusion of 6 billion yen in Japan started “21st Century Light Plan”; the United States since 2000, $ 500 million to implement the “National Semiconductor Lighting Plan”; same year, the EU has also announced the launch of the “Rainbow Plan.” Despite the early start in the LED industry in China, but government support is not enough, until 2009 the Ministry of Science “City million LED project” files launch, the domestic Decorative Lamp industry will usher in a larger development project launched LED around the race.

As the heat increases the domestic market, LED industry was once caught in the concept of flying, defiant, scarce innovation dilemma. Part of the installation of high-power LED lights in the demonstration project, the result is not satisfactory, one after another night out the lights, life is short, bright enough, maintenance problems and other issues. Already installed solar lights, and later to the thermal power light, highlights the shortcomings of saving money is not festival, a serious blow to the confidence of LED lights around the installation, the LED Strip Light industry, impeding the healthy and rapid development.

Fortunately, the state always to promote the development of LED industry as a strategic direction. May 19, issued by the Ministry of Science and re-launched the second batch of pilot and demonstration projects, LED industry continues to develop a clear strategic direction for the development of Led Tube industry new impetus, the future prospects of the domestic market.

Today, LED industry barriers focused on the high cost of initial installation. In actual fact, LED initial installation price than the traditional high-energy light, but in the long term economic benefits are considerable. In this regard, Group Sales Director Bai Yuxiang German sources to reporters calculations. Bai Yuxiang introduced, compared with the traditional high pressure sodium lamp. If you achieve the same brightness, 200-watt high pressure sodium lamp need, solar LED lights only low-power 20-watt, 10 hours a day according to the lighting needs of the industrial use of electricity one yuan terms, high pressure sodium lamp per year for each tariff 200W * 10 小时 * 365 days * 1 yuan = 730 yuan. The low-power solar thermal power LED lights do not need, you can save per lamp per year on electricity up to 730 yuan. This does not include the initial installation of high-pressure sodium lamp included cables and other equipment needs, long-term need for manual maintenance costs. Solar small power LED is not the cost of laying cables, no manual maintenance costs, no electricity expenditures. “Small solar-power LED with a higher than normal high pressure sodium lamp installation fee, but 2-3 years can recover the full investment.” Bai Yuxiang said.

T5 led tube lights technology

As T5 led tube lights technology continues to evolve, the LED as a light source as possible, because the light source in the lighting fixtures on the color index CRI has strict requirements, and the current color white LED technology in terms of the less mature, making it constraints LED as a light source of the main obstacles.

Composite white light, very easy to break through the prism of white light contains all colors in the light. The LED is a more comprehensive source chromatogram, which features wide color gamut LED lighting products for the high color laid a theoretical foundation.

Just a kind of wave-particle two-phase nature of the substance that contains the characteristics of the wave properties of particles are included, so that it has a strong complex features, so in light of the nature and terms of the characteristics of LED, the a high-quality LED light source as possible.

The current white LED Tube technology, mainly blue-chip production process follow-coated phosphor, this technology was developed by Nichia Corporation developed a certain sense, followed the principle of fluorescent light tubes, this technology because red and green components missing, so that on the existence of congenital color index gap, currently fill the gap, phosphor technology to become the main direction within the industry.

Blue chip manufacturing white phosphor coating technology, which in principle can produce better white light, but in the course because of the ability to adapt to the environment is weak, resulting in differences in theory and practical products, such differences arise largely because the LED heat accumulated on the effects of phosphor produced.

We have had experience, high-power white LED as the work time, heat production and heat loss gradually to reach equilibrium, the equilibrium temperature is higher, for the use of the same type of white LED Spot light phosphors affect the more large.

Led Tube company

Light-emitting diode (LED) industry event of a cold front. Lead the development of the EU into recession, coupled with the industry standard has not yet introduced, and focus on the development of Neo-Neon LED business issued profit warning, 90% LED lighting business at a loss, suggesting that the industry exists in the undercurrents. Analysis pointed out that LED products varies greatly, but with the standardization and subsidy policies have been put behind and some of the excess products will be eliminated. Led Tube is still the trend, but to replace the century-old incandescent light, a real “Myriads of Lights” is still a long way.

Despite the huge investment, but in view of technical problems, that entry is actually about 70% of companies engaged in the downstream packaging and application services, and the two parts of the total profit of about 10% to 20% of the upstream and middle reaches of the wafer and chip business profits up to 70%. Industry sources say that the high-end chips, and now more than 80% from Taiwan or overseas, the core technology at this stage is still mainly concentrated in Japan and U.S. companies.

LED lights account for 40% to 60% of the cost of the chip, the high cost of raw materials and technology, leading to the loss of price competitiveness, the main reason for not successfully enter millions of households. Power than traditional incandescent light LED 5 to 9 times, the cost of traditional lamps are often more than twice the price of natural high. It is understood, however, in recent years, the price of the chip at an annual rate of decline of about 20%. In addition, the company has recently developed a technology that will reduce the cost of nearly Qicheng LED Bulb , and another company successfully reduced the price of an ordinary LED lamp energy saving lamp level.

In addition to technical improvements, conducive to the development of policy in the “five” plan to promote the next in succession. At present, Dongguan, Huizhou, Foshan, Shenzhen, Dalian, Xiamen, Nanchang, and the development of relevant industries in succession planning. Market rumors, LED industry standards and subsidies is expected by the end of the introduction.

Some analysts pointed out that the standard in the industry before the inevitable problems are not introduced, the various manufacturers of LED Spotlight is different specifications and different ways, reportedly 50% of products on the market there is no standard inferior product.

The price of LED Tube Light

Temperature in the LED Tube Light section, the most effective means is to design a high thermal performance of the LED package, which is China’s LED industry in the near future be able to make significant progress on LED intellectual property one of the direction, the LED is a low-voltage electronic products, electrical safety requirements in a more relaxed, so the thermal conductivity of the substrate material can be used more, and we study this industry is small, resulting in repeated breach of foreign intellectual property disputes.

Improve the stability of the phosphor, is the mainstream of white LED technology, in this regard our current technology is relatively weak, short-term progress can not be exceeded for the majority of enterprises to seek a breakthrough in this area is difficult.

Color compensation technology is to compensate for the lack of color LED Strip Light color rendering index caused a reduction techniques, this technology is feasible from the principle of speaking, but in practice, faced with mixed light conditions the strict constraints of technology , so the practical value is not high.

3:6:1 RGB white line based on the mixing theory, this theory is based on our look at bright objects on the basis of this mixing technique can be successfully applied in white LED display technology, but application in the lighting program on the program this mixing is not much reference on the nature, this is because the human eye to visible light has a characteristic and average characteristics of a habit, and these two characteristics, which we unconsciously damage the eyesight of the important reasons.

Because according to the nature of lighting and clear, light on the object, the object into the eye through the reflection, so as to form a lighting process, as objects of various wavelengths of light absorption is different, so solid red, green and blue color Led Tube 3:6:1 mix through out the white light technology, itself, there are some color defects, exposure to the surface, because the red, green and blue are absorbed by different surfaces, different reflections, resulting in the reduction of CRI . Therefore, a three-color mixing technology and the production of white products, the surface should be in the components or the use of technical means within the product mix of light, so that a white light, rather than sending the light of three different objects in the illuminated surface mixing, the resulting lower CRI.

Red, green and blue color LED color mixing technology is a more mature white lighting technology, this technology because the distance between the different LED light mixing caused by the larger distance, mixed with the LED front mask, although the solution of the mixed light problem, but the light loss is an obstacle for the development of lighting in the formation toward the light barrier. Another person when direct lighting is not even watching the white; these two factors directly restricts the development of this technology.

Mixing of the three color LED technology, which is based on research to solve these two problems and proceed. Found that with decreasing distance between the LED chip from the mixed light decreases exponentially with trichromatic color powder coated surface concentration increases exponentially mixing effect is also enhanced in-depth study to start Three-color LED chip spacing decreased and concentration increased three-color look for an optimal balance between the point is a solution to the three primary colors of light mixed with the best programs, which make the tricolor white LED as a light source as possible.

At present, China is in the LED packaging industry, though a big country, but far behind in innovation and technology, mixing three primary colors red, green and blue light technology, to borrow the phosphor coated white LED technology, can achieve the perfect white effect.

LED Tube installation

Transformer determines the quality of life of the whole lamp, lamp beads with more than 50,000 hours no problem, but the transformer if it is broken, can not afford the whole lamp will light. Transformers used in electronic components, the design determines the efficiency of the transformer, power factor, stability, temperature rise, life. If users do not understand the components of knowledge, from the transformer size, weight, and the manufacturer of electrolytic capacitors, etc. using the initial judgments. LED Flood Light price difference is not a small proportion of total quality transformer.

LED fluorescent lamp energy saving up to 80% or more, lamp life of more than 10 times normal, almost maintenance-free, there should always replace the lamp, ballast, starter problems, about six months down the cost savings can be exchange costs. Environment-friendly semiconductor light source, light and soft, pure spectrum eye protection and favor of the workers health, 6000K cool white light and gives the feeling of cool visual, help to focus and improve efficiency.

LED Spotlightinstallation is simple, it points to two kinds of internal and external power supply, power supply built-in LED lamp installed, replace the original LED fluorescent lamp off and remove ballast and starter, to 220V AC power can be directly added to the LED lamp ends. External power supply with a dedicated LED fluorescent general lighthouse, you can replace the original use.

LED Tube Lightcompressive body or stainless steel material, durable, water seepage, excellent heat dissipation; Cover 304 stainless steel casting, anti-corrosion, anti-aging; silicone ring, excellent water resistance, resistance to high temperature, anti-aging; high-strength glass, light transmission is strong, light, radiation, wide, load-bearing ability; all solid stainless steel screws are used; protection grade of IP67; optional plastic embedded parts, easy installation and maintenance. Underground Light High Power LED Input voltage AC220V, LED life of up to 50,000 hours, protection class IP67.

LED Tube

Solid-state lighting, Desk Lamps, also known as incandescent, fluorescent lighting after the third generation technology, energy saving, environmental protection, safe and reliable, solid-state light source is optimistic about the industry in the next decade to replace the traditional lighting of the great potential of new light represents the future of lighting technology. Development of new solid-state lighting, lighting is not only a revolution in the field, and consistent with the current government’s “building a resource-saving and environment-friendly society” requirements.

Low-power design, 150 hours power only once, lamps provide adequate lighting in case of power as possible. Production of light using semiconductor technology has a very high photoelectric conversion efficiency, providing the power you can maximize become bright. DC power supply, effectively eliminating the additional electromagnetic loss, further reducing overall energy consumption, so that the whole power of less than 7.5w

LED Bulb widespread attention and rapid development, and it itself has the advantages are inseparable. To sum up these advantages are: high brightness, low voltage, power consumption, small size, long life, impact resistance and stable performance. Potential for the development of LED, Shanghai Xing Ma old company as an industry leader in electronics, in the early development of the industry plays a key role. At present, LED is moving higher brightness, higher weather resistance, higher luminous density, higher luminous uniformity, reliability, full color direction.

Currently the use of LED Tube for some time, in the car lights, flashlights, etc. The application has been received well, but in street lamps and lighting have not seen many applications, this may be a bottleneck with the current technology has not yet completely break a relationship, LED although there are many advantages, but in the intensity, color temperature, and exposure range there are significant deficiencies. Such as high light intensity, but it’s not strong enough to give people the feeling of sharp glare, fluorescent light is far from sorted out than the illuminated area is too small.

Led Tube company

Light-emitting diode (LED) industry event of a cold front. Lead the development of the EU into recession, coupled with the industry standard has not yet introduced, and focus on the development of Neo-Neon LED business issued profit warning, 90% LED lighting business at a loss, suggesting that the industry exists in the undercurrents. Analysis pointed out that LED products varies greatly, but with the standardization and subsidy policies have been put behind and some of the excess products will be eliminated. Led Tube is still the trend, but to replace the century-old incandescent light, a real “Myriads of Lights” is still a long way.

Despite the huge investment, but in view of technical problems, that entry is actually about 70% of companies engaged in the downstream packaging and application services, and the two parts of the total profit of about 10% to 20% of the upstream and middle reaches of the wafer and chip business profits up to 70%. Industry sources say that the high-end chips, and now more than 80% from Taiwan or overseas, the core technology at this stage is still mainly concentrated in Japan and U.S. companies.

LED lights account for 40% to 60% of the cost of the chip, the high cost of raw materials and technology, leading to the loss of price competitiveness, the main reason for not successfully enter millions of households. Power than traditional incandescent light LED 5 to 9 times, the cost of traditional lamps are often more than twice the price of natural high. It is understood, however, in recent years, the price of the chip at an annual rate of decline of about 20%. In addition, the company has recently developed a technology that will reduce the cost of nearly Qicheng LED Bulb , and another company successfully reduced the price of an ordinary LED lamp energy saving lamp level.

In addition to technical improvements, conducive to the development of policy in the “five” plan to promote the next in succession. At present, Dongguan, Huizhou, Foshan, Shenzhen, Dalian, Xiamen, Nanchang, and the development of relevant industries in succession planning. Market rumors, LED industry standards and subsidies is expected by the end of the introduction.

Some analysts pointed out that the standard in the industry before the inevitable problems are not introduced, the various manufacturers of LED Spotlight is different specifications and different ways, reportedly 50% of products on the market there is no standard inferior product.

LED Tube installation

Transformer determines the quality of life of the whole lamp, lamp beads with more than 50,000 hours no problem, but the transformer if it is broken, can not afford the whole lamp will light. Transformers used in electronic components, the design determines the efficiency of the transformer, power factor, stability, temperature rise, life. If users do not understand the components of knowledge, from the transformer size, weight, and the manufacturer of electrolytic capacitors, etc. using the initial judgments. led ceiling light price difference is not a small proportion of total quality transformer.LED fluorescent lamp energy saving up to 80% or more, lamp life of more than 10 times normal, almost maintenance-free, there should always replace the lamp, ballast, starter problems, about six months down the cost savings can be exchange costs. Environment-friendly semiconductor light source, light and soft, pure spectrum eye protection and favor of the workers health, 6000K cool white light and gives the feeling of cool visual, help to focus and improve efficiency.

LED Tube installation is simple, it points to two kinds of internal and external power supply, power supply built-in LED lamp installed, replace the original LED fluorescent lamp off and remove ballast and starter, to 220V AC power can be directly added to the LED lamp ends. External power supply with a dedicated LED fluorescent general lighthouse, you can replace the original use.

LED underground light compressive body or stainless steel material, durable, water seepage, excellent heat dissipation; Cover 304 stainless steel casting, anti-corrosion, anti-aging; silicone ring, excellent water resistance, resistance to high temperature, anti-aging; high-strength glass, light transmission is strong, light, radiation, wide, load-bearing ability; all solid stainless steel screws are used; protection grade of IP67; optional plastic embedded parts, easy installation and maintenance. Underground Light High Power LED Input voltage AC220V, LED life of up to 50,000 hours, protection class IP67.

The development of Led Tube

In recent years, raw materials and rising prices of upstream components, combined with increased labor costs, resulting in the problem of rising production costs. Moreover, to enhance consumer brand awareness, distribution channels, the level of fees rising year by year, in the joint action of many factors, many lighting companies have put forward the slogan of the transition.

Personal view is that any lighting companies in the initial stage is to rely on the profit model, which is a necessary process, but after a certain stage of development, in particular, many companies rely on primitive accumulation of capital to complete this model, the simple rely on this profit model, may be able to maintain their status quo sales, but to achieve greater performance, then, was profitable to rethink the issue.

led down light ，the rapid development of the world known as a sunrise industry. The front-end multi-Jun Li, Shenzhen LED business “on foot” event, and this year more than 80 Shenzhen LED bankruptcy or winding up of the reality, so that a quite popular industry seems to have become a popular “hot potato.” It was in this market context, the development of Shenzhen Great Wall Technology Co., Ltd. (referred to as the Great Wall Development) announced plans to invest nearly 50 billion yuan to build a complete LED industrial chain. The end of the global chip giant has an alliance with other partners in related industries are also actively negotiation.

Build a business overall LED Spotlight industry chain, only the international Philips, GE, Osram such mine. In China, only the Great Wall is being developed by the steady implementation of the blueprint. So, the Great Wall of industrial development in the end judged based on how and advantages of this strategy assessment lock it? Yesterday, the reporter interviewed the development of Shenzhen Great Wall Technology Co., Ltd. Vice President Chen Zhu Jiang. His answer is, if an LED price and the price quite a hamburger, the market demand will be stimulated immediately. Great Wall of development, is to control all key aspects of the industry chain, to minimize the cost, performance and price of both the leading edge of LED products into the global market.

To promote the development of Led Tube industry, enterprises bigger and stronger, should break through the bottleneck of two prominent: First, the core technology and key equipment controlled by others, the second is marketing applications difficult. To this end, LED industry should form a collaborative innovation mechanism, the Government should give some support to their market application.